Harley Kawasaki Hog Saddlebags Set Throw Over Smooth Hard Side Waterproof Large

Dimensions: 16"L x 7"W x 12H. 2pc Smooth Side - Motorcycle Bag Set. Large size - plenty of room. One Adjustable Buckle with Clip Closure. UV protected & will not turn white in extreme heat.

Heat Protection on bottom of bag. High Quality Leather Like Hard PVC bags. You can have you bike ready for touring in a matter of minutes.

Plenty of room to pack for your next trip. These SaddleBags will look good and will fit most of the Harley Davidson, Honda, Kawasaki, Yamaha, Suzuki, BMW motorcycles. 1 Pair of Slanted W Braids and Studs Saddle Bags. Measures : 16" Width x 12" Height x 7 Thickness. > Using a hex wrench, or Phillips screwdriver loosen the motorcycle seat retaining bolts.

Pull the motorcycle seat up and back to remove the seat from the motorcycle. > Untie the drawstring at the bottom of the saddlebag yoke. Place the left saddlebag where you want the bag to rest.
While holding the left saddlebag, place the right saddlebag where you want the bag to rest. Line up the holes on the saddlebag yoke that, when tied together, will allow the bags to sit in their current position. Place a cable tie through two aligned holes in the yoke and remove the saddlebags from the motorcycle. > Remove the saddlebags from the motorcycle and lay them on a flat surface. Trim each end of the yoke so that there is no excess saddlebag material that may prevent the bag from opening or closing properly. If there are fewer than six holes that line up when one side of the yoke is placed over the other, you may choose to drill extra holes through the yoke to provide a more secure yoke attachment. > Cut the cable tie off. Line up the remaining holes on the yoke and run the drawstring through the holes as if you were lacing up a shoe.

Once all of the holes have the drawstring running through, tie the drawstring as if tying a shoelace. Place the saddlebags as before on the motorcycle. Secure the bags to the motorcycle frame using the cable ties.

> Reinstall the motorcycle seat over the saddlebag yoke, and replace the seat retaining bolts. Tighten the bolts so that the seat holds the saddlebags against the motorcycle frame. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Luggage, Racks & Storage\Saddlebags & Panniers".

The seller is "don_jose_mex" and is located in this country: US. This item can be shipped to United States.